RW crossed roller bearing

RW series crossed roller bearing has an integrated structural design for the inner and outer rings. Due to the double-rowing of the rolling surfaces and the use of small diameter rollers, the number of rollers is approximately five times higher than that of the conventional crossed roller bearing HRU type* (HRW 228 type). This reduces torque while maintaining compactness, rigidity and precision. Due to the optimum design of the size and number of mounting bolt holes, the deformation of the rolling surface caused by mounting is reduced, resulting in stable rotational performance.

RW series											unit：mm
Model	Inner ringΦ		Outer   circleΦ		height		Mounting hole				load
							Inner ring		Outer ring
	d	public   errand	D	public   errand	B   B1	public   errand	dp	N-d4×d5   ×h1	Dp	N-d2×d3   ×h	C [kN]	C0  [kN]
RW145	100	0-0.020	185	0-0.030	20	0-0.075	115	12-5.6×10×5.5	170	12-5.6×10×5.5	24.6	59.3
RW164	120	0-0.020	210	0-0.030	30	0-0.075	138	12-7×11×6.5	192	12-7×11×6.5	48.6	112
RW195	150	0-0.025	240	0-0.030	30	0-0.100	168	16-7×11×6.5	222	16-7×11×6.5	54.1	136
RW228	160	0-0.025	295	0-0.035	35	0-0.100	184	12-11×17.5×10.8	270	12-11×17.5×10.8	59.3	161
RW230	180	0-0.025	280	0-0.035	40	0-0.100	200	18-7×11×6.5	260	18-7×11×6.5	87	215
RW250	200	0-0.030	300	0-0.035	40	0-0.100	220	20-7×11×6.5	280	20-7×11×6.5	89.7	231
RW297	210	0-0.030	380	0-0.040	40	0-0.100	240	16-14×20×13	350	16-14×20×13	101	288
RW323	260	0-0.035	385	0-0.040	50	0-0.120	282	24-9.3×15×9	363	24-9.3×15×9	168	422
RW388	325	0-0.040	450	0-0.045	50	0-0.150	347	30-9.3×15×9	428	30-9.3×15×9	199	558
RW445	350	0-0.040	540	0-0.050	50	0-0.150	385	24-14×20×13	505	24-14×20×13	216	652
RW463	395	0-0.040	525	0-0.050	50	0-0.150	418	36-10×15×9	502	36-10×15×9	208	634
RW530	460	0-0.045	600	0-0.050	50	0-0.150	486	40-10×15×9	574	40-10×15×9	233	771
RW665	580	0-0.050	750	0-0.075	60	0-0.150	610	32-12×18×11	720	32-12×18×11	334	1120
RW760	650	0-0.075	870	0-0.100	60	0-0.150	690	32-14×20×13	830	32-14×20×13	360	1290