Solution to abnormal sound of cross roller bearing

Replace in time after wear and tear

After the crossed roller bearing has abnormal noise, check the surface of the bearing to see if there is any collision or damage. If there is a problem with the bearing, it needs to be replaced in time, because the slight problem in the bearing will also affect the operation of the bearing. make an impact.

Adjust the gap

If the gap of the crossed roller bearing is too small, its additional torque will increase, so when abnormal noise occurs, you can also check whether the gap is too small and try to adjust the gap.

Replace lubricating oil

The selection of lubricating oil has a great influence on the performance of the bearing, so more attention should be paid to the selection of lubricating oil. The lubricating oil has a great influence on the bearing speed, load noise, wear and corrosion.

It is a very common situation that abnormal noise occurs during the operation of the bearing. It is necessary to carefully analyze the cause of the abnormal noise and find a corresponding method to solve it. The above is the introduction of the causes and solutions of the abnormal noise of the cross roller bearing, and I hope it will be helpful to everyone.